 | Track width :230mm |
| Track height :330mm |
| Total width assembled :1105mm |
| Total length with blade :2420mm |
| Number of assemblies for passing manway :11 |
| Total weight assembled :550kgs |
| Drive :2 hydraulic motors with integral gearboxes |
| Controls :Remote joystick in control room |
| Tracks :Continuous Nitrile rubber self tensioning |
| Suction: Bill type suction with hydraulic raise lower |
| Pump: On board NES670 rotary lobe pump controlled from console |
| Assembly fixings :Pins/slot-in/quick release couplings |
| Speed :Variable 0 to 40m/min |
Moverjet and Manway Cannon
Cannon –Hydraulic powered cannon with camera + lighting and twin screen wash system
Umbilical –80 meters fully sheathed umbilical all hydraulic and
electrical services for Moverjet and cannon.
Camera and light Specification.
General: Pan 340 degrees
Tilt 170 degrees
Hydraulic drive X 2
Fluid sealing to 1500 psi max
Camera: Low light (0.1 lux)
Auto Iris
Auto Focus
Zoom 12:1 + 4X Digital
Camera Housing: NEC Class1 Div1 Groups B,C&D
Light 110v HPS 100w 9600 bare lamp lumens
Class 1 Division 1 Groups C&D
Connections Class 1 Division 1 Group C&D plug and
socket for umbilical connection
Nozzle specifications
Nozzle Naval brass with stream straighteners incorporated
Nozzle data in US Gal/min as follows:-
|
NESL 640-140 Lobe Pump |
NESL 670-270 Lobe Pump |
|
Max Flow-84m3/h Max Pressure 6.2 Bar |
Max Flow-162m3/h Max Pressure 6.3 Bar |
|
Suction inlet-4"/100mm Discharge-4"/100mm |
Suction inlet-6"/150mm Discharge-6"/150mm |
|
Drive-Hydraulic Motor Max Speed 540RPM |
Drive-Hydraulic Motor Max Speed 540RPM |
|
Mounting-on board Moverjet |
Mounting-4 wheeled trolley |
|
Control- remote |
Control- Hydraulic valve Forward/Reverse/Stop |
|
Dimensions-720 X 274 X 463 Weight 154Kgs |
Dimensions-873 X 274 X 463 Weight 194Kgs |
|
Number of Lobes-4 Materiel-Nitrile Rubber |
Number of Lobes-8 Materiel-Nitrile Rubber |
|
NES 501 Cavity Screw Pump |
| Mounting: steel frame |
| Pump:Helical screw cavity |
| Stator:Nitrile |
| Drive: Hydraulic |
| Inlet:6" |
| Outlet:6" |
| Pressure:10bar Flow:60m3/hour |
|
NES502A Hydraulic driven centrifugal
pump |
| Mounting:steel frame |
| Pump: two stage centrifugal |
| Drive: Volvo F12 hydraulic motor |
| Flow: 250 USG/Minute |
| Pressure:250 psi |
| Inlet: 3" |
| Outlet: 2" |
|
NESL 402A Hydraulic Power Pack |
|
Engine- Iveco 804I 4 cyl diesel water cooled |
|
Power(intermittent)-56KW@2500rpm |
|
Power(continuous) -50.5KW@2500rpm |
|
Displacement 3.9 l - 12v electrics |
|
Pump- 134 l/m @ 250 Bar |
|
Mounting Protection Frame with lifting point |
|
Fuel and Hydraulic Tanks- incorporated |
|
Full instrumentation and controls fitted |
|
Safety- Spark Arrestor/Chalwyn inlet valve/Engine protection |
|
Use- NES502A / NES501 |
|
NESL 402C Triple Hydraulic Power Pack |
NESL 405A Mobile Hose Reel |
|
Engine- Iveco 8065Si 6 cyl turbo diesel water cooled |
Number of reels 2 (1-supply to Mover (in sit and ride mode) 2- supply
to Lobe pump) |
|
Power(intermittent)-119.5KW@2500rpm |
All steel construction frame with lifting point |
|
Power(continuous) - 104KW@2500rpm .max125KW |
Length of Umbilicals 300 feet fully sheathed with QR couplings
including air line for Mover operator |
| Generator:belt driven from
engine 12.5kva 400/230v |
|
Displacement 5.9 l - 12v electrics |
Extension hoses to Power pack 2 X 50 feet with QR couplings |
|
Pump- 223 l/m @ 250 Bar Variable displacement on demand pressure
compensated |
|
Mounting:inside acoustic power house |
|
Fuel and Hydraulic Tanks- in central container room |
|
Full instrumentation and controls fitted in control room |
|
Safety- Spark Arrestor/Chalwyn inlet valve/Engine protection |
|
Use-NES Moverjet/NES640/NES Manway Cannon |
