ROVERjet Specification

Tracks -

width open 44 "

Width closed 22 "

Length 72"

Weight 1260 lbs.

Cannon –Hydraulic powered full cannon with full camera + lighting and screen wash system (as per manway cannon specification)

Umbilical –250 ft fully sheathed umbilical 4" dia containing all hydraulic and electrical services for tracked vehicle and cannon.

Insertion Ramp –Hydraulically operated insertion ramp to enable machine to enter tank and open up to the operating position without man entry.

Manway & Roverjet Cannon camera and light Specification.

General: Pan 340 degrees

Tilt 170 degrees

Hydraulic drive X 2

Fluid sealing to 1500 psi max

Camera: Low light (0.1 lux)

Auto Iris

Auto Focus

Zoom 12:1 + 4X Digital

Camera Housing: NEC Class1 Div1 Groups B,C&D

Light 110v HPS 100w 9600 bare lamp lumens

Class 1 Division 1 Groups C&D

Connections Class 1 Division 1 Group C&D plug and socket for umbilical connection

Nozzle specifications

Nozzle Naval brass with stream straighteners incorporated

Nozzle data in US Gal/min as follows:-

Supply Pressure PSI	Typical Nozzle Diameter
	5/8"		3/4"		7/8"		1"
	Flow GPM	(ft) Jet Length	Flow GPM	(ft) Jet Length	Flow GPM	(ft) Jet Length	Flow GPM	(ft) Jet Length
120	129	72	162	84	226	90	290	95
150	149	81	184	100	248	100	319	105
175	158	84	193	110	257	105	334	110

 

7/8 and ¾ nozzles are supplied with unit

Manway Cannon additional specifications

Adapter Adjustable for 24 , 30 and 36" manways

 

Hydraulic Power Pack for powering of Roverjet System & Centrifugal Pump Specification

Engine- Iveco 8061 6 cyl diesel water cooled

Power(intermittent)-84.5KW@2500rpm

Power(continuous) -76 KW@ 2500rpm

Displacement 5.9 l - 12v electrics

Fitted with splitter box for 1 X tandem pumps + 240v 3 phase generator 5.6 KW

Pump No.1 for the cannon feed pump & lobe pump - Plunger type pilot operated with variable displacement 150 l/min 250 bar

Pump No.2 for the ROVERjet + Manway cannon - Plunger type pilot operated with variable displacement 50 l/min 250 bar

Mounting Protection Frame with lifting point

Oil Cooler 7.5 KW

Pressure line filtration 10 micron abs.

Fuel and Hydraulic Tanks- incorporated

Full instrumentation and controls fitted

Safety- Spark Arrestor/Chalwyn inlet valve/Engine protection

Cannon feed pump specification

Drive: Hydraulic Motor powered from ROVERjet Power pack

Pump: 4 x 3 - 13 inch centrifugal pump3600rpm Viton/Tungsten carbide seals

Max Flow: 250 USG/m

Max Pressure: 250 psi

Inlet: 4"

Outlet: 3"

Unit Skid mounted: 1600mm X 1000 X 1100

Weight: 1650kgs